As a pool owner, your goal should be to keep your pool’s water crystal clear. However, this might not always be achievable especially when it has been stuck for quite a while. During your daily inspection, you might see that the water has gone slightly cloudy or there might be some algae growth. This is why you must do your best to keep things under control and simple enough, using this step-by-step guide on how to clean a green swimming pool , you should be able to do so on your own.
Draining your pool
The first step would be to determine whether or not you should drain the water from your pool. If the water is blackish or dark green, then it would be more effective to just drain all the water completely and then do an acid wash on the surface instead of having to clean the water with the use of chemicals. This is a crucial step that you must keep your mind on. The most basic way in which you should be able to determine whether or not you can still treat the pool chemically is to check if you can see at least a foot below the surface level.
Lowering your pool’s pH
Another thing that you should take note of would be the pH of your pool water. There are a lot of pH kits that you can buy out there that should be helpful to you but you can also easily assume that it is already on a high pH because of the color so you can opt-out of buying the kits. The next thing you can do is to add products that will help you to reduce the pH of your pool. You just need to add the manufacturer’s instructions on the label and then see the difference after a few hours. By doing this, you should be able to easily figure out if you are effectively lowering the pH of your pool water. If you want to be able to learn how to clean a green swimming pool, then this is an important step.
Shocking your pool
After all that, the next thing you would want to do is to shock your pool with the use of granular chlorine and this is great and would help you to instantly kill the algae on your pool that is causing it to turn green. The instructions should be written accordingly so you just need to follow that and should be able to balance things out using your kit. This is not that hard as long as you keep the label in mind and ultimately realize that it is really easy to do as long as you know the terms better.
Pumping and filtering
After you are done lowering the pH and shocking your pool, you would also need to pump water back in especially since you had it drained out. There would be a lot of filters available for you to use so you need to find the one that you think would fit you best. You can use a sand filter especially if you want to do backwashing so that there would be no sediment or dirt on the water. This is a necessary step that you should not skip so make sure that you will do things right so you can have a cleaner pool. It is better for you to know about Ask Reader.
Floc your pool
After you have done everything, there will still be some little cloudy residue that will remain and these are very high concentration of dirt that has resisted the pool chemicals and were small enough to pass through simple filtration. Adding on a flocculent would help you to let the debris flock together so that they would easily be taken into a machine when you clean them out.
Kill the stubborn algae
Once that you have eliminated almost all of the things on your list, the next thing to do would be to remove the algae which is the very reason your pool is green. You just really need a good algaecide that you can find online or in the supermarket. Make sure that you grab one for yourself and you would be able to find the project that you have long thought of. And that is the last step on how to clean a green swimming pool .
By visiting this site apkpure you can download most popular games and software.